Why test for leptosperin at all?
Because MGO can be faked and leptosperin, as far as UMFHA describes it, can't. UMFHA's UMF vs MGO page says MGO "occurs in products other than mānuka honey and can be synthesized and added to honey, so does not authenticate the product". Leptosperin comes from the mānuka flower, so its presence is evidence of where the honey came from.
Where does leptosperin come from, and who discovered it?
It was identified in 2012 by Yoji Kato's team at the University of Hyogo, who isolated it from New Zealand mānuka honey and named it "leptosin" after the genus Leptospermum; the name later became leptosperin. Chemically it is methyl syringate with a two-glucose sugar (gentiobiose) attached. In the honeys they tested, the amount ran from 0.2 to 1.2 µmol per gram, and they found it only in honeys from the Oceania region (Kato et al., 2012).
How much leptosperin does each UMF™ grade need?
UMFHA sets a leptosperin minimum alongside the MGO and DHA minimums for every grade. Notice that the leptosperin column stops climbing: it is >200 mg/kg at UMF™ 15+ and stays there at 20+ and 25+, while the MGO minimum keeps rising. That is the point of it. Leptosperin answers "is this mānuka?"; MGO is what the grade number scales with. The full table is below, copied from UMFHA's own page.
| UMF™ grade | MGO mg/kg (min) | Leptosperin mg/kg | DHA mg/kg (min) |
|---|---|---|---|
| UMF™ 5+ | 83 | >100 | 150 |
| UMF™ 10+ | 261 | >150 | 250 |
| UMF™ 15+ | 512 | >200 | 400 |
| UMF™ 20+ | 826 | >200 | 500 |
| UMF™ 25+ | 1197 | >200 | 500 |
Scroll the table sideways to see every column.
Is leptosperin only found in New Zealand mānuka honey?
No. It comes from the Leptospermum genus, not from New Zealand as such. Kato's team found it abundantly in Australian jelly bush honey (Leptospermum polygalifolium) as well as New Zealand mānuka, and a 2017 University of Auckland study found it "at elevated concentrations" in several woody-fruited Australian Leptospermum species (Bong et al., 2017). So leptosperin tells you the honey came from Leptospermum nectar. That a jar is from New Zealand is shown by the label, the producer and, for a UMF™ jar, the licence number.
Does leptosperin break down in the jar over time?
Not much, on the evidence we can find. The 2017 Auckland study reported that leptosperin "was chemically stable over prolonged storage at 37°C", which is warmer than any pantry. That is different from the other UMF™ markers: DHA slowly turns into MGO as the honey ages, which is why UMFHA tests both. If you are wondering what that means for an old jar, our guide to whether mānuka honey expires covers the dates on the label.
How do laboratories measure leptosperin?
Leptosperin glows under ultraviolet light. The 2017 study showed that one of mānuka honey's two distinctive fluorescence signatures, called MM1, is caused by leptosperin: adding pure leptosperin to clover honey, or to an artificial honey, produced the same signature. The authors suggested fluorescence could be a fast way to screen for Leptospermum honeys. Accredited New Zealand food laboratories run the test for producers; it isn't something a shopper can do.
Does an MGO-only jar have leptosperin?
It may well, but the label doesn't say. An MGO figure is one measurement of one compound, and no leptosperin minimum comes with it. If a jar only prints MGO, you are taking the producer's word that it is mānuka; with a UMF™ grade, a licensee has had the batch tested for leptosperin too, and the licence number on the jar can be looked up on UMFHA's list.
How to check a mānuka jar has been tested for leptosperin
- Look for a UMF™ grade
A UMF™ grade (5+, 10+, 15+, 20+ or 25+) means the batch was tested against UMFHA's leptosperin minimum. An MGO figure alone does not.
- Find the licence number
UMF™ jars print the licensee's number next to the grade. No number, no UMF™ test you can check.
- Check it on UMFHA's list
Look the licence number up on UMFHA's certified brands page and make sure the brand matches the jar.
Frequently asked questions
Is leptosperin the same as MGO?
No. MGO (methylglyoxal) is the compound the grade number is pegged to. Leptosperin is a separate compound that shows the honey came from mānuka flowers.
What was leptosperin originally called?
Leptosin. The University of Hyogo researchers who identified it in 2012 named it after the genus Leptospermum; it is now called leptosperin.
Is leptosperin found in Australian mānuka honey?
Yes. Published studies found it in Australian Leptospermum honeys, including jelly bush, sometimes at high concentrations. It shows the honey is from Leptospermum nectar, not which country it came from.
Does leptosperin degrade over time?
A 2017 University of Auckland study found it chemically stable over prolonged storage at 37 °C, unlike DHA, which slowly converts to MGO as honey ages.
Do K Factor jars test for leptosperin?
The K Factor labels describe whether honey is monofloral or multifloral mānuka under the government's test. How K Factor, UMF™ and MGO differ.
Does kānuka honey contain leptosperin?
We haven't found a source we can cite on that, so we won't say. Kānuka honey is sold under its own name and doesn't carry a UMF™ grade.
Is more leptosperin better?
UMFHA tests it for authenticity, not as a quality score, and we make no claims about what any compound in honey does for you.
Sources
- UMF Honey Association — what UMF™ means — last checked 19 October 2026
- UMF Honey Association — UMF vs MGO — last checked 19 October 2026
- UMF Honey Association — the UMF™ Four Factor Quality Testing (the grade table) — last checked 16 September 2026
- UMF Honey Association — certified brands — last checked 16 September 2026
- Kato et al. (2012), "Identification of a novel glycoside, leptosin, as a chemical marker of manuka honey", Journal of Agricultural and Food Chemistry 60(13) — last checked 3 November 2026
- Bong et al. (2017), "Leptosperin is a distinct and detectable fluorophore in Leptospermum honeys", Food Chemistry 214 — last checked 3 November 2026